Flashing Easy Way Samsung Galaxy ACE 3 S7270

How to Flash Samsung Galaxy ACE 3 S2720


A2Cell - Hallo ... glad to meet again, this time I will explain how to flash the galaxy ace 3, this article I created because there was a request from one of the users who ask and ask to be made, actually does already exist aplenty on the internet, but because I I finally published this promise. 


After I posted about how flashing galaxy ace 2 may have such as trilogy story xixixi .. Actually for the flashing process is not difficult, almost the same as the Samsung android phone flashing. Flashing why this should be done ?? hmm..bisa so you do not know why the android device should flash, for the reason that most mainstream is because the device is damaged such as failure to boot (bootloop), ngeblank, hank, etc. There is also also because they want to upgrade to a newer version. Well..setelah length is time we go straight to practice,

Preparation and How Flashing Galaxy Ace 3 GT S7270

1. The device Galaxy Ace 3 (make sure the battery is full) and CPU / Laptop
2. Download Odin v 3:10
3. Download Usb Driver Samsung
4. Download Firmware Galaxy Ace 3

• After the download is completed Extract to your Drive.
• Run the application Odin,
• Then create your Galaxy Ace 3 at the position Downloading Mode in a way, Turn off your smartphone, press the volume DOWN + Home + Power

                 " Continue by pressing Volume UP "

• After that plug your Galaxy Ace 3 to cpu / Laptop if your device is recognized it will exit the display as shown below in Odin, with a sign in yellow.

If you are connected, click on "PDA" and locate the firmware file "S7270XXUAMFC_S7270OLBAMF6_S7270XXUAMF5_HOME.tar.md5" already you estrak. tick the "auto-reboot" and "f. reset time".

If you are sure everything is correct, proceed with men-click the Start button, wait until the flashing process is completed. 

Note: if it fails repeat the procedure from the beginning again .. !!