Tips on How to Go to Recovery Mode on Iphone

Tips How to Enter Recovery Mode Iphone

Recovery mode in iphone, ipod, ipad also known as DFU in terms of computer / windows called booting.

I was forced to learn oprek-oprek iphone because yesterday I fared less fortunate because the iphone that I bought turned out to be problematic. often restart and stuck in my iphone logo apple.ketika disease recurrence sure he asked again and again connected to itunes.dan always makes my heart ache to buy this cell phone huhuhu ..

but not anything coz there is a silver lining can also be an additional experience and knowledge to solve problems of apple's iphone. on this occasion I will only discuss how to go into recovery mode system iphone, ipod, ipad just let this post is not too long.

go into recovery mode / DFU this apple gampang2 difficult because it must true, true concentration while doing so.

okay with it:

1. open / run itunes in your computer / laptop

2. connect the iPhone to the computer via a USB data cable.


3. turn off the iPhone by pressing the POWER + HOME simultaneously until iphone screen blank.

4. Release the power button but do not release the home button for 10 seconds approximately up pop-up as shown below as a sign has been detected by itunes iphone

5. If succeed go into recovery mode iphone screen looks like the following picture

Explanation Recovery Mode and DFU mode, may be useful for all of you, Maybe someday you will be a need for both of these methods in Improving your error that occurred on the iPhone, iPad or your iPod.

- What is Recovery Mode?

Recovery Mode is a condition in which the iBoot has been / is being loaded onto the iDevice. Because iBoot is active, then we can only do the upgrade because iBoot not allow the downgrade process is done. iDevices are in a state of Recovery Mode iTunes logo will appear on the screen and a USB cable.

- How do I get into Recovery Mode?

To go into Recovery Mode :

IDevices Turn off and disconnect from the USB cable connection (if connected).

Press Home.

When pressing the Home button, connect your iDevice to the computer with a USB cable.

Still hold the Home button until the iTunes logo and a USB cable appears on the screen. as shown above

To exit the Recovery Mode, press and hold the Power and Home buttons simultaneously for about 10 seconds until iDevice turns on normally again.

- What is DFU mode?

DFU Mode or Device Firmware Upgrade Mode is a condition / special mode where iDevices (iPhone / iPad / iPod touch) not / do not load the operating system in it, including the iBoot, and can deal directly with iTunes. iDevices are in a state of DFU Mode will sail dark but not dead.

Because iBoot and the operating system is not loaded, then the iDevices can be downgraded and upgraded using the official / stock firmware or custom firmware.

DFU mode display as shown below :

How do I get into DFU Mode?

To get into DFU Mode :

Connect your computer to the iDevices

Turn off the iDevices

Press and hold the Power button for 3 seconds

Without releasing the Power button, press and hold the Home button for 10 seconds

Release the Power button and continuing holding the Home button

Still hold the Home button until the notification of iTunes, which means your iDevices detected as Recovery Mode

iDevice that go into DFU Mode screen has a black / dark but not dead, and no logo nothing. iDevice who failed to get into DFU Mode usually go into Recovery Mode, signs are emerging iTunes logo and a USB cable.

the formula like this to enter DFU mode :

1- press the power button 3 seconds until the Apple logo appears and is not released

2- then continue by pressing the home button 10 seconds to blink / apple logo is missing

3-after flashing / apple logo disappear off the power button but do not release the home button for 15 seconds

finish ..

How do I get out of DFU mode?

The way to get out of DFU mode is :

Press and hold the Home button and the Power button simultaneously until the Apple logo appears

Do not forget to press the home key + power simultaneously when the iphone connected to itunes

click the home button and the iPhone will reboot

What is the difference between DFU Mode and the Recovery Mode?

The main difference between DFU Mode and the Recovery Mode is on iBoot. iBoot is the bootloader used on iOS devices (iPhone / iPad / iPod touch). Recovery Mode will load / activate iBoot to restore or upgrade process, while the DFU Mode does not load and will pass iBoot, so that the DFU Mode we are not only able to restore and upgrade but also can downgrade iOS.

iBoot will be active during the Recovery Mode runs, iBoot will check and ensure that the IOS to be restored must have a newer version than what is currently installed, otherwise it will iBoot terminate this restore process. Therefore, to downgrade us to position iDevice into DFU mode first.

So, to restore and upgrade the IOS we just need to position iDevice into Recovery Mode, but if you want to downgrade or upgrade to a custom firmware then we need to make iDevice go into DFU Mode.

that's roughly the discussion about recovery mode and DFU iphone, ipod, ipad etc that uses OS -IOS of aplle. useful hopefully if there are less please add .we discussed in the comment box. thanks